乐园彩票平台

Home > FAQ for Thermal Pads

FAQ for Thermal Pads

 

Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.
 
Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.
 
Q: Are thermal pads offered with tacky?
A: Yes, all the thermal pads have its inherent tacky. All the models are natural tacky for two sides, except for the LD8100U,only one side has natural tacky.
 
Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.
 
Q:Will the heat make the thermal pads softer?
A: From -60-150,there is no significant change in the hardness of thermal pads, as gap filler.
 
Q: What’s the tolerance for the thickness?
A :Normally ±10%.
 
Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.
 
Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.
 
Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.LD8100U has fiberglass on its surface, all other models will be made at your requirement.

HomeAbout UsProducts&ServicesTechnologyNews&EventsQualityContact Us

乐园彩票平台Copyright © 2009-2011 Dongguan Leader Optronics Technology Co., Ltd All Right reserved.

鑫乐博彩票平台 即发彩票注册 辽宁福彩网 乐透乐彩票注册 六分彩票官网 河北福彩网 竞技彩票官网 牛逼彩票导航